Skip to main content
Opting in properties from LMPM
Julie Lanio avatar
Written by Julie Lanio
Updated over a week ago

Once you have LMPM enabled for Breezeway, all properties must be made visible to Breezeway from within LMPM. Below are steps to opt in properties in bulk, as well as individually.


  1. Go to Settings--Integrations--Breezeway.

  2. Locate the properties in the section at the bottom of the page.

  3. Check off all properties to be made visible to Breezeway.

  4. Click the 'Save' button.

Individual Property

  1. Ensure the property is set to active (published).

  2. Go to the Distribution tab.

  3. Locate Breezeway and click the toggle from 'Off' to 'On.'

Did this answer your question?